![]() At this point i think the program reading are false or my sensors are broken. And another issue while i opened my temperature reading program after 4 or 5 hours of usage it says 41 degrees and jumps in to 56 instantly, when i closed the program and read again it says 41 degrees again. Theres no mechanical component inside SSDs, so they outperform traditional HDDs with higher resistance to shock, vibration (1500G/0. ![]() i mean my program shows my HDD is 34 degrees and both my hdd and ssd placed in same location, when i touched my ssd it feels little warm compared to hdd but there is absouletly no 30 degrees difference. And also there is a air intake right in front of the ssd.ĭoes it feel warm? Yes, but little. I placed the ssd in front of my case by using maximum possible distance to heat sources like graphics card and gpu. Does it at least feel warm? 64C I would think should at least feel a bit warm Could that be it?Īlthough it still doesn't explain why it doesn't feel hot. I was thinking that maybe the SSD was in a hot part of your case. Even all disk drive(s) (hard disks or SSDs) can have different, custom health thresholds and custom temperature thresholds too and alert(s) will be triggered only when these custom thresholds sounds like you are looking at the right reading.īTW.the max operating temp on that SSD is 70C. Tip: To back up the entire disk, please select Copy Disk Wizard. Hard Disk Sentinel gives complete textual description, tips and. Its goal is to find, test, diagnose and repair hard disk drive problems, report and display SSD and HDD health, performance degradations and failures. Then select Copy Partition Wizard and click Next to skip the welcome page. Hard Disk Sentinel (HDSentinel) is a hard disk monitoring software with highest possible support of HDD/SSD/SSHD (hybrid) drives. Note: on the Overview page, you can also double click on the Health value (and bar) to configure custom health thresholds too for any hard disk drive or SSD. Hard Disk Sentinel Revision History Hard Disk Sentinel 5. To back up your partition with MiniTool Partition Wizard, you should connect an external hard drive to your PC. The temperature value should rise upon disk activity of course for any hard disk drive or SSD. The most common values are 32, 40, 48 Celsius, regardless of usage. You may even have custom alerts for any devices to prevent too frequent alerts. Some SSDs (to prevent displaying this '' in Hard Disk Sentinel), always provide a fixed, usually fake (not valid) number as temperature. If you prefer to avoid possible overheat alert(s) or notifications, I'd recommend to open the Temperature page of this SSD and in the upper right corner, you can configure custom warning/alert thresholds by the Set custom temperature thresholds option, so until that, the temperature will shown as "green" for this SSD. The result is decreased according the number of days when the temperature was too high. The elapsed power on time decreases this value. The SU650 sports SLC caching and advanced LDPC ECC technology to ensure optimized performance and data. It delivers read/write performance of up to 550/510MB/s and greater reliability than 2D NAND SSDs. This is equal to 1825 days in 24/7 mode or 43800 hours. The ADATA Ultimate SU650 M.2 2280 SSD features 3D NAND Flash, a high-speed controller, and up to 1TB capacity. Some models provide warning/critical temperature values recommended by the manufacturer, if this is available, the Information page may display such values. By default, the total expected lifetime of a hard disk in perfect condition is defined as 5 years (running every day and night on all days). 50-60 Celsius is not surprising (even in idle, when there is no read/write activity) on such SSDs. Generally this is normal: most SSDs (especially NVMe M.2 / PCIe SSDs) usually work at (and tolerate) higher temperatures better.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |